VU+ Solo2 Full HD Twin Tuner Linux PVR Ready Receiver
February 10th, 2014VU+ Solo2 Full HD Twin Tuner Linux PVR Ready Receiver
£309.00
Description
VU+ Solo2Product Description
VU+ Solo2 is the latest generation, high end Linux based High Definition Satellite Twin Tuner Receiver.
VU+ Solo2 provides a full HD 1080p viewing experience and uses the lastest 1300 Mhz processor for lightning speed operation.
VU+ Solo2 Comes with the following included accessories;
- HDMI Lead
- 8Gb USB Memory Stick
VU+ Solo2 Main Features
- Transcoding function
- Airplay feature
- Opera Browser
- HbbTV
- HDMI 1.4
- HD PIP
- Gigabit Lan
- Plug and Play support for 2.5″ SATA – Hard Drives
- 12 character VFD display
- External 12 V power supply
VU+ Solo2 Specification
- 1300 MHz MIPS processor
- 256MB Flash
- 1GB DDR3 DRAM
- Gigabit Lan
- 1 x DVB Common-Interface Slot
- 2 x Smart Card Reader (Xcrypt)
- 3 USB ports (1x front, 2x rear)
- SPDIF optical audio output (digital)
- 1 x HDMI 1.4 video / audio output (digital)
- 1 x Scart (TV)
- 1 x RCA video output
- 2 x audio output (L / R) RCA (analog)
- Plug and Play support for 2.5″ SATA – Hard Drives
- unlimited channel lists for TV / Radio
- EPG (electronic program guide) support
- Support of Bouquet lists
- OSD in many languages ​​and skin-support
- automatic / manual channel search
- DiSEqC 1.0/1.1/1.2, USALS
- External 12 volt power supply
- Power switch
Technical Details:
- DVB-S2 tuner:
- Input frequency range 950 .. 2150 MHz
- Signal Level – 65 dBm … – 25 dBm
- Tuner Input Connector F-Type female
- Input impedance 75 ohms
- AFC + / – 3.5 MHz
- QPSK and 8PSK demodulation
- FEC Viterbi and Reed-Solomon
- Viterbirate 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
- Roll-off Factor 35% Common-Interface:
- Common-Interface Power Consumption max. 0.35 A/5V video decoding:
- Video Compression MPEG-2 / H.264 and MPEG-1 compatible
- Video Standard PAL G / 25 Hz, NTSC
- 4:3 / 16:9
- Letterbox for 4:3 TV-Device Output Digital:
- Output Level 0,5 Vss on 75 Ohm
- Frequency: 32 kHz, 44.1 kHz, 48 kHz
- S / PDIF optical, coaxial (AC3) audio decoder:
- Audio compression MPEG-1 & MPEG-2 Layer I and II, MP3
- Audio Mode Dual (main / sub), Stereo
- Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
- Output analog:
- Output Level L / R 0,5 Vss on 600 Ohm
- THD> 60 dB (1 kHz)
- Crosstalk <-65 dB Video parameter:
- Input Level FBAS 1 Vss + / – 0.25 dB on 75 Ohm TV Scart:
- Output: FBAS, RGB, Ethernet over OSD:
- 1000/100/10 MBit compatible interface USB:
- USB 2.0 connector (3x) LNB power and DVB-S2 Tuner:
- LNB Current 400mA max. , Short-circuit proof
- LNB Voltage horizontal “no load 19.5 V” 17.6 V at 400mA
- LNB Voltage vertical “no load 14.5 V” 11,8 V at 400mA
- LNB is switched off in the standby mode, control of the satellite position:
- DiSEqC 1.0/1.1/1.2 and USALS – Rotor Control Power consumption:
- <13W (in operation, with LNB) Goldwafers.com
- <12W (in operation, without LNB)
- <0.5 W (Deep-Standby-Mode) Input voltage:
- External power supply:
- Input:
- 110-240V AC / 50-60Hz / 1,0 A
- Output:
- 12V = / 3,5 A