MOTECK V-BOX II (DiSEqC 1.2 to 36v Positioner Convertor)

MOTECK V-BOX II (DiSEqC 1.2 to 36v Positioner Convertor)

£89.00

Out of stock

Description

Product Description

MOTECK V-BOX II 36V POSITIONER

ALLOWS A RECEIVER WITH DISEQC 1.2 TO CONTROL A 36V ACTUATOR/MOTOR!

CAN BE USED AS A STAND-ALONE POSITIONER!

SUPPORTS 5V IN CASE YOU HAVE A FIFTH WIRE!

The Moteck V-Box II allows allows a DiSEqC 1.2 satellite receiver to control a conventional actuator style 36 volt motor. It takes DiSEqC 1.2 commands from your MPEG-2 / MPEG-4 DVB satellite receiver and converts it into 36v pulse and sensor to store positions, 60 positions can be stored. It can work as a stand alone positioner too.

5 VOLT SUPPORT – WITH V-BOX II ALSO SUPPORTS 36 VOLT MOTORS/ACTUATORS WITH READ AND OPTI SENSOR (+ 5VOLT).

Technical Specification:

  • Compatible with any Actuator or H-H Mount
  • 3 Digit LED Display
  • Drive Dish up to 3M (Optional:5M)
  • 60 Satellite Positions
  • Fine-tune EAST / WEST Buttons
  • Electric Overload Protection ( Auto-recovery )
  • Anti-Noise Design
  • Model V-BOX II
  • Input 230 VAC / 50Hz(110 VAC / 60Hz available)
  • Output 36 VDC
  • Max. Output Current 3.5A / 4.2A
  • Max. Power Consumption 80W / 100W
  • Protocol DiSEqC 1.0 / 1.2
  • Controled by DiSEqC 1.2 Receiver or as standalone unit
  • Remote Control
  • Resynchronize Function YES
  • Manual Buttons Power ON / OFF, EAST / WEST
  • Protection Software Limit Protection